PA6 GF30 Series Property Ranges
These ranges are illustrative across formulations and test conditions; they are not the grade-specific values of PA6 WHG30A. Use the matching datasheet and molded-part tests for approval.
| 속성 | 가치 | 테스트 표준 |
|---|---|---|
| 유리 섬유 함량 | 30% | ISO 1172 |
| 인장 강도 | 125-175 MPa | ISO 527 |
| 굴곡 탄성 계수 | 5,218-8,500 MPa | ISO 178 |
| 충격 강도 | 12-17 kJ/m² | ISO 180 |
| 열 변형 온도 | 165-190°C @1.8MPa | ISO 75 |
| 녹는점 | 215-230°C | ISO 3146 |
| 수분 흡수 | ~1.8% | ISO 62 |
Exact-Grade Datasheet Reference: PA6 WHG30A
Typical values from the WanHan “PA6 GF30.pdf” datasheet for grade WHG30A: tensile strength 165 MPa (ISO 527-2), flexural modulus 6,000 MPa (ISO 178), heat deflection temperature 175°C (ISO 75-2/B, 0.45 MPa), and density 1.36 g/cm³ (ISO 1183).
The PDF does not state specimen conditioning. Its impact row names Izod but cites ISO 179, a Charpy standard, so confirm the method before using that value. The PDF’s ISO 75-2/B HDT cannot be substituted for the 1.8 MPa figures in the series tables. These are typical material values, not finished-part guarantees. Request the current PDF and test conditions for the selected formulation.
PA6 시리즈 소재 성능 비교표:
| 속성 | PA6 GF15 | PA6 GF30 | PA6 GF40 | PA6 GF50 | PA6 GF60 |
|---|---|---|---|---|---|
| 유리 섬유 함량 | 15% | 30% | 40% | 50% | 60% |
| 밀도(g/cm³) | 1.21 | 1.38 | 1.46 | 1.56 | 1.67 |
| 인장 강도(MPa) | 118 | 165 | 185 | 200 | 220 |
| 휴식 시 연신율 (%) | 3.3 | 3.0 | 2.8 | 2.0 | 2.0 |
| 노치 충격 강도(kJ/m²) | 10 | 12 | 13 | 14 | 14 |
| 열 변형 온도(℃, 1.8MPa) | 160 | 175 | 215 | 216 | 220 |
Choosing PA6 GF30 for Your Part
PA6 GF30 contains 30% glass fiber by weight. It is a common starting point when an unfilled or lower-filled grade does not meet stiffness or dimensional requirements. Fiber orientation, moisture conditioning, mold design and surface finish still need review for the actual part.
For more retained toughness or a less reinforced surface, compare PA6 GF15. For a higher stiffness target, review PA6 GF40 and its processing trade-offs. See the PA6 selection page for the wider range.
Share the current grade or TDS, application, service temperature, moisture or chemical exposure, required properties, color and requested documents. A drawing is optional for a material-only inquiry, and estimated usage may be stated as “Not sure yet”.
주요 장점:
뛰어난 중량 대비 강도 비율
PA6 GF30 provides metal-like strength at a fraction of the weight, enabling lightweight design without compromising performance.
High Thermal Resistance
Heat deflection depends on the exact formulation, conditioning and ISO 75 method. Compare the matching grade datasheet and test molded parts at the intended service temperature.
뛰어난 치수 안정성
Low moisture absorption and minimal thermal expansion ensure consistent performance in varying environmental conditions.
우수한 내화학성
Excellent resistance to oils, fuels, and many chemicals, making it ideal for automotive and industrial applications.
산업 애플리케이션:
PA6 GF30은 일반적으로 자동차 부품, 인테리어 부품 및 우수한 표면 마감과 기본적인 강성이 필요한 기타 응용 분야에 사용됩니다.
산업 전반의 혁신 지원
| 산업 | 주요 애플리케이션 |
|---|---|
| 자동차 | 엔진 커버, 흡기 매니폴드, 구조용 브래킷, 센서 하우징, 커넥터. |
| 전기 및 전자 | 회로 차단기, 스위치, 커넥터 하우징, 절연 부품. |
| 산업 장비 | 기어, 베어링, 기계 하우징, 롤러, 기계 부품. |
어떻게 선택하나요?
간단히 말해서
-
For 좋은 인성 또는 비용 효율성, 고려해야 할 사항 PA6 GF15.
-
For 균형 잡힌 전체 성능, 를 선택하고 PA6 GF30.
-
For 더 높은 강성, 강도 및 내열성, 비용이 덜 민감한 경우 다음을 고려하십시오. PA6 GF40/50/60. 일반적으로 유리 섬유 함량이 높을수록 이러한 특성이 향상됩니다.
왜 우리를 선택해야 할까요?
PA6 GF30 Questions
Q: Is the 190°C figure the HDT of WHG30A?
A: No. The WHG30A PDF gives a typical HDT of 175°C under ISO 75-2/B (0.45 MPa). The 165–190°C range above is a general illustration with a different stated condition; confirm the exact grade and test load for approval.
Q: Should I use GF15 or GF40 instead?
A: Compare GF15 if lower reinforcement may satisfy the load while retaining the desired finish or toughness. Compare GF40 if the part still needs higher stiffness; check fiber orientation, warpage and molded-part results.
Samples, timing and documents: Free samples are available for qualified projects. Standard-grade production is normally 5–7 days; custom formulations normally take 2–3 weeks. Material documentation and applicable certifications can be provided for the selected grade. Confirm availability and scope with the technical team.
