PA6 GF35 유리섬유 강화 나일론 6 펠릿

PA6 GF35 is nylon 6 reinforced with 35% glass fiber, supplied as pellets for injection molding. It is used for reinforced housings, brackets and structural parts where stiffness and dimensional control matter.

소재: 35% glass-fiber-reinforced nylon 6, in pellet form.

참조 등급: PA6 WHG35A; typical tensile strength 175 MPa and flexural modulus 7000 MPa.

애플리케이션: Power-tool frames, automotive brackets, industrial housings and impellers.

선택: Share the part, operating conditions, color and material quantity.

카테고리: ,

PA6 GF35 Material Overview

PA6 GF35 is nylon 6 reinforced with 35% glass fiber, supplied as pellets for injection molding. It is used for reinforced housings, brackets and structural parts where stiffness and dimensional control matter.

항목 세부 정보
고분자 PA6 (나일론 6)
보강 35% 유리 섬유
양식 펠릿
레퍼런스 등급 PA6 WHG35A
처리 사출 성형

Typical Material Properties

참조 등급: PA6 WHG35A. The following values are from the supplier datasheet linked below; they are typical material values, not finished-part specifications.

속성 대표값 단위 시험 방법
인장 강도 175 MPa ISO 527-2
파단 시 인장 변형률 9 % ISO 527-2
굽힘 탄성 계수 7000 MPa ISO 178
HDT, 방법 B 175 °C ISO 75-2/B
밀도 1.40 g/cm³ ISO 1183
성형 수축 0.5 % ISO 2577

HDT is reported under method B. The source does not state specimen conditioning. Confirm the current grade and test conditions before design approval.

Download PA6 WHG35A supplier datasheet (PDF)

PA6 GF35 Applications

Nine illustrative PA6 GF35 application and development examples; see the descriptions below
예시 적용 사례; 해당 부품에 적합한 등급을 확인하십시오. 이미지를 탭하면 확대됩니다.

Power-tool gearbox housings and load-bearing frames.

Reinforced shells and frames support gears, bearings and fasteners. Check screw bosses, weld lines and vibration loads in the molded part.

Automotive brackets and industrial housings.

Mounting brackets, covers and machinery housings need repeatable fit around inserts, ribs and attachment points. Review the load direction and moisture exposure when setting tolerances.

Fan impellers, pump components and appliance frames.

These parts combine rotating or assembly loads with temperature exposure. Confirm fluid compatibility and validate the molded component for its duty cycle.

가공 및 부품 검사

선택한 등급의 건조 및 성형 지침을 따르십시오. 시험 성형 과정에서 게이트 위치, 섬유 배향, 용접선, 수축률 및 중요 치수를 확인하십시오. 의도한 금형과 공정을 사용하여 제작된 부품의 성능을 확인하십시오.

완성된 부품의 경우, 계속해서 사출 성형. 재질 비교를 하려면 다음을 사용하십시오. 엔지니어링 플라스틱 제품군.

자재 공급 및 제조 지원

나일론 플라스틱 엔지니어링 플라스틱 공급과 맞춤형 제조를 연계합니다. WANHAN은 당사의 협력 복합 제조 공장입니다.; 아래 사진들은 이 설비의 원료 공급 장비, 압출 공정 및 실험실을 보여줍니다.

나일론 플라스틱의 협력 공장인 완한의 원료 공급 설비
재료 공급
완한 협력 공장에서 생산된 압출 플라스틱 스트랜드
압출 공정
완한 협력 공장의 실험실 작업 구역
실험실

등급 및 제형 선정

현재 등급, 적용 분야 및 작동 조건을 알려주십시오. 당사에서 자재 검토를 진행한 후, 제안된 제형에 적합한 데이터시트를 찾아드리겠습니다.

주문하신 상품에 대한 고품질 문서

구매 팀에 필요한 TDS, 배치 기록, 검사 요건 또는 규정 준수 관련 파일을 명시하십시오. 견적 대상 자재에 대한 문서 및 수락 기준은 합의된 바에 따릅니다.

수지 펠릿을 넘어선 지원

완성된 부품의 경우, 소재 선정과 부품 설계, 금형 및 성형 검토를 연계해야 합니다. 도면, 예상 생산량 및 중요 치수부터 검토를 시작하십시오.

협력 공장 관리 시스템 인증서

제공된 ISO 9001, ISO 14001 및 ISO 45001 인증서는 다음을 입증합니다. 광둥 완한 인증 대상 기관으로서, 해당 기관의 업무 범위는 다음과 같습니다. 변형 플라스틱 과립 및 관련 관리 활동; 이 인증은 모든 재료 등급이나 모든 완제품 제조 서비스를 인증하는 것은 아닙니다.

제조 역량 및 품질 관련 문서를 검토한다. 문서 승인을 위해서는 법인명, 인증 범위 및 제시된 등급이 일치해야 합니다.

PA6 GF35 — Frequently Asked Questions

What is PA6 GF35?

PA6 GF35 is nylon 6 reinforced with 35% glass fiber, supplied as pellets for injection molding. The PA6 WHG35A datasheet on this page is the supplier reference for the listed typical properties.

Which parts can use PA6 GF35?

Typical candidates include power-tool gearbox housings, automotive mounting brackets, machinery covers, fan impellers and appliance frames. Ribs, screw bosses, load direction and weld lines need checking in the molded part.

Can I use these datasheet values as finished-part specifications?

No. They are typical values for PA6 WHG35A test specimens. The source does not state specimen conditioning; agree the conditioning, test method and acceptance criteria for your part before approval.

What should be checked before molding PA6 GF35?

Follow the selected grade’s drying instructions. Review moisture exposure, gate position, fiber orientation and shrinkage before setting critical dimensions. Confirm fit and performance with the intended tool and process.

Is this PA6 GF35 grade flame retardant?

A glass-fiber percentage does not establish a flame rating. If your part requires a flame classification, send the standard and specimen thickness so the matching formulation and supporting record can be checked.

What do you need to quote PA6 GF35?

Send the application, current grade or material target, color, quantity, service conditions and delivery destination. For molded parts, add the drawing, critical dimensions and expected production quantity.

자재 데이터 및 견적 요청

용도, 가능한 경우 관련 자료, 사용 온도, 부하 또는 유체 노출 조건, 색상, 예상 수량 및 배송지를 알려주십시오. 완성된 부품이 필요한 경우 도면을 첨부해 주십시오.

Request PA6 GF35 TDS and Quote

위로 스크롤

연락하기

아래 양식을 작성해 주시면 곧 연락드리겠습니다.

연락처 정보